Step 1: Locate Your Natural Gas Meter
It's important to know exactly where your natural gas meter is so you can find it in case of an emergency. The following diagram shows four possible natural gas meter locations:
NOTE: DO NOT turn off your meter unless you smell natural gas, hear the sound of gas escaping or see other signs of a leak--and ONLY if it's safe to do so. For more information, learn how to recognize and respond to a natural gas leak.
Step 2: Find the Natural Gas Shut-off Valve
As you face the meter, you'll see a pipe running from the ground to the meter. There is a shut-off valve running parallel with the pipe, usually located about 6 to 8 inches above the ground. Take a 12-inch or larger adjustable wrench, and turn the valve 1/4 turn in either direction, until the valve is crosswise to the pipe. (See Diagram B)
TIP: Keep a 12-inch or larger adjustable wrench with your emergency supplies, or next to your valve. Do not store the wrench on the meter or other natural gas piping or related equipment.
CAUTION: If you turn off your natural gas at the meter, leave it off. Do not turn it back on yourself. Contact us to turn the meter back on and relight the pilots.
Natural Gas Shut-off Valves
For safety, a shut-off valve should be installed at every natural gas appliance. If a leak happens at a specific appliance, the valve allows you to turn off the natural gas at the appliance rather than shutting off all of your natural gas service. Some valves require a wrench to turn them.
Electric Bonding or Grounding
Do not use SoCalGas'® natural gas meter, natural gas piping, natural gas risers or related equipment for electrical bonding or grounding because it's not safe or permitted. Use caution when touching natural gas meters, risers, valves and attached components. Faulty household appliances or faulty household electrical wiring could inadvertently introduce electricity to natural gas facilities that can cause an electric shock.
How to Shut Off Your Meter
- Locate your natural gas meter.
- Find the natural gas shut off valve.
- Using a 12-inch or larger adjustable wrench, turn the valve 1/4 turn in either direction.